簡(jiǎn)體中文
English
Русский
BYJ11-54-01A
Belongs to category: Solenoid for AC wet valve
AC 110V 50HZ
AC 220V 50HZ
Features:
- Applicable to 10-way hydraulic solenoid directional valve.
- With threaded connection, the coil can be replaced without shutdown.
- Equipped with manual emergency device.
- Coil inner hole φ26.
- Encapsulated with BMC thermosetting plastic.
Outline and connection dimensions:
|
technical parameter |
||
|
Ambient temperature |
℃ |
-25~50 |
|
Voltage fluctuation range |
% |
85～110 |
|
Rated power |
W |
38 |
|
Rated stroke |
mm |
4 |
|
Full stroke |
mm |
≥8.5 |
|
Working oil pressure |
Mpa |
≤21 |
|
Degree of protection |
IP65 |
|
|
Operating frequency |
T/h |
12000 |
|
Power on duration |
% |
100 |
|
Insulation class |
H(180) |
|
|
Electrical connection mode |
Junction Box |
|
Matters needing attention:
1. The coil shall not be powered on alone, which has the risk of burning!
2. Non explosion-proof coil shall not be used in medium with explosion risk!
3. After the coil is installed, it must be grounded reliably, otherwise there is a risk of electric shock！
F-S characteristic curve:
The sample data comes from the laboratory environment and is only for reference. If your company needs the latest data or has special needs, please contact Boye hydraulic engineer.
Go back
