Product Selection Guide
Code | Power form | Diagram |
DC | DC input | |
AC | AC input/
External half wave rectifier circuit |
|
BC | Built in half wave rectifier circuit | |
RC | Built in full wave rectifier circuit | |
DC/S | Built in bidirectional secondary pipe |
Electrical connection form and protection level | |||||||
Code | Name | Protection Level |
Diagram | Code | name | Protection Level |
Diagram |
A | Junction box type | IP65 | D | DP04-2P | IP67 | ||
G | three-prong
DIN43650 ISO4400 |
IP65 | H | cable type | IP67 | ||
J | AMP | IP67 | L | lead type | IP67 | ||
S | two-prong
SAE J858a |
IP65 | K | threaded type
Kostal |
IP67 | ||
Other connection methods available upon request |
Precautions for use
1. The coil shall not be powered on alone, which has the risk of burning!
2. The electromagnets at both ends of the solenoid valve shall not be energized at the same time!
3. The electromagnet shall not be used in the environment exceeding the rated working pressure!
4. Before using the electromagnet, confirm that the input voltage is correct and stable to avoid coil burning or failure to work!
Safety precautions
1. Non explosion-proof coil shall not be used in medium with explosion risk!
2. After the coil is installed, it must be grounded reliably, otherwise there is a risk of electric shock!